Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in South San Francisco, CA | Spruce Contractors
We’re Spruce Contractors, an independent Mr-Glass installer serving South San Francisco’s 94080 and 94083 zip codes. The short version: we template, cut, and fit Mr-Glass frameless shower enclosures and panels to the actual tile plane and rough opening in your bathroom, not to a factory spec sheet. In South San Francisco, where 1950s tract homes carry out-of-plumb walls and marine-layer dampness, that independence is what keeps your glass sealed and swinging true. Call (877) 265-5771 for a free estimate.
Our Mr-Glass sales & service work spans the full line: frameless sliding systems, semi-frameless pivots, custom-cut tempered panels, and the hinge and hardware sets that make them work. You’ll find us throughout the South San Francisco service area, from the older tracts off Chestnut Avenue to the newer infill near the bayfront.
Why South San Francisco Residents Choose Us for Mr-Glass Service
Nate Calloway, our owner, grew up in Hillsborough and spent years on job sites across San Mateo County before Spruce Contractors. That matters in South San Francisco because the housing stock here has a personality. Post-war tract homes on raised foundations, garages cantilevered over slopes, fog that hangs around until noon. We know how these houses move, how they hold moisture, and what that does to glass enclosures over time.
We’re not an authorized Mr-Glass dealer. We don’t want to be. Being independent means we stock OEM-compatible hinges, rollers, seals, and handles so your existing enclosure keeps working when the hardware is still sound. When the glass itself has chipped edges or etch damage, we step up to quality aftermarket tempered panels or a full OEM replacement. The call is always repairable vs. replace, told straight.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in South San Francisco
- Fog-fed mineral film and etch damage. The marine layer in South San Francisco keeps bathroom surfaces damp for longer stretches than inland cities. Unvented bathrooms in 1940s and 1950s homes let that moisture sit on the inside face of frameless panels. Heavy mineral and soap scum films hide scratches and etch damage until the glass is already compromised. We can often polish light etching, but deep damage means a panel replacement.
- Seasonal racking on raised foundations. Post-WWII wood-frame homes in South San Francisco sit on raised foundations that shift through the wet winter and dry summer cycle. Out-of-plumb jambs rack semi-frameless doors until the rollers bind or the pivot swings proud of the strike jamb. We re-tile or re-plane the opening, then re-hang the glass so it tracks clean.
- Bottom-track corrosion from subfloor moisture. Raised-foundation garages built over slopes let moisture wick up into the subfloor and bottom track zone. Over time, hinges corrode and the caulk line where glass meets curb breaks down. We replace the failed hardware, repair the curb, and re-seal the full bottom edge.
- Inset tile lips from original 1950s tub alcoves. Many original South San Francisco tub alcoves have an inset tile lip that a semi-frameless panel cannot sit flush on. Bypass door rails leak at the sill when the tile plane isn’t corrected first. We float and re-tile the opening before any glass goes in.
- Frameless sliding systems that drift off-rail. Frameless sliding Mr-Glass doors depend on a level header. South San Francisco homes settle unevenly, and a quarter-inch drift over a 60-inch opening binds the rollers. We re-level, replace worn rollers, and set the door back on a true line.
Mr-Glass Service in South San Francisco: What Local Conditions Mean for Your Equipment
South San Francisco sits directly in the SFO flight path. Roofing and addition work here, unlike in Daly City or San Bruno the same way, can trigger FAA obstruction evaluations or airport notice requirements before a crane or rooftop equipment goes up. That forces us to sequence exterior work and material deliveries around an approval window rather than a weather window. And that same scheduling discipline carries into our General Contractor in South San Francisco interior glass work on occupied homes.
What does the flight path have to do with a shower enclosure? It’s about how we run a job. When we’re converting a tub to a walk-in shower in a 94080 tract home near South San Francisco’s older neighborhoods, we plan the tile float, the template visit, the glass order, and the install around the homeowner actually living in the house. No mystery windows, no missed measurements. The same precision that keeps a crane out of an FAA conflict keeps a tempered panel from arriving a half-inch wrong. Good work doesn’t need a lot of explaining, you can see it.
On a 1950s raised-foundation tract home in the older part of 94080, our crew took on a tub-to-shower conversion where the original alcove was a half-inch out of plumb on both end walls. We floated and re-tiled the opening to a true plane, then templated and installed a Mr-Glass frameless fixed-panel and hinged-door enclosure with OEM hinges. The door swings clean and the panel seals tight against the rebuilt curb. No bypass track to leak at the sill.
Mr-Glass Models & Products We Service in South San Francisco
We install and service the full Mr-Glass residential lineup: frameless sliding shower door systems, semi-frameless pivot enclosures, custom-cut tempered glass panels and fixed panels, and the custom shower hinges and hardware sets that keep them working. In South San Francisco, we stock common OEM-compatible rollers, seals, and hinge sets locally so turnaround for a hardware swap doesn’t stretch into weeks. Glass panels get templated and ordered to the actual opening, so lead time runs with the fabricator, not a guess. For frameless enclosures, a walk-in shower, or a tub-to-shower conversion, one contractor handles the whole scope, because that’s how you keep the tile, the curb, and the glass working as one system.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in South San Francisco
| Service | Typical Range in South San Francisco |
|---|---|
| Frameless Glass Shower Enclosure (Walk-In Shower Installation) | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Shower Replacement | $3,540 – $10,030 |
What drives the price here is the condition of the existing opening. A 1950s alcove that needs floating and re-tiling before the glass can go in runs higher than a clean opening that’s ready for template. Out-of-plumb walls, inset tile lips, and failed curbs all add scope, and we line-item all of it in a written estimate before any work starts. Call (877) 265-5771 and we’ll walk the space and put a real number on it. Estimates are free.
Serving South San Francisco, CA — Our Local Coverage Area
We’re based in the South San Francisco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in South San Francisco
In most South San Francisco homes we see, it’s raised-foundation movement. Post-war wood-frame houses shift through the wet-dry cycle, and the shower opening goes out of plumb. That racks the door until rollers bind or the pivot swings past the strike jamb. We correct the opening first, then re-hang the glass so it tracks clean. Call (877) 265-5771 and we’ll take a look.
Yes. The marine layer keeps moisture on bathroom surfaces longer, and in unvented 1940s and 1950s baths, that moisture films the inside of frameless panels with mineral deposits. Over time that hides etch damage. Light etching can sometimes be polished; deep etch means a panel replacement. It’s a fixable problem if you catch it early.
If the hardware and the opening are sound, replacing just the glass panel is usually the right call. We template the replacement to the actual tile plane and order quality aftermarket tempered glass or an OEM panel, whichever matches the existing geometry better. When the glass doesn’t match a remodeled opening or the hardware is also failing, full replacement is the cheaper long game. Call us at (877) 265-5771 and we’ll tell you which way it goes.
Not directly, no. FAA obstruction evaluations apply to crane work, rooftop equipment, and exterior additions, not an interior shower. But the scheduling discipline that comes with the flight path carries into our interior work. We plan glass work on occupied South San Francisco homes the same way we sequence exterior work: around the homeowner’s life and the approval window, not a weather window.
Sometimes yes, often no. If the opening is within a quarter-inch of plumb and the tile plane is clean, a frameless fixed panel and hinged door can work. South San Francisco’s 1950s alcoves often have inset tile lips or out-of-plumb walls that need floating and re-tiling first so the panel sits flush and the door swings true. Call (877) 265-5771 for a free measurement and a straight answer.
Service Areas Near South San Francisco
We serve South San Francisco and the nearby communities along the Peninsula. You’ll find our Mr-Glass work in Mr-Glass service in Brisbane, just over the border from 94080, and in Mr-Glass service in Colma, where the housing stock runs similar mid-century tracts. We also cover San Bruno, Pacifica, and Daly City for glass enclosure and shower work.
Book Your Mr-Glass Service in South San Francisco Today
Ready to get your shower glass measured and priced? Call Nate Calloway’s team at Spruce Contractors at (877) 265-5771. We’ll schedule a free estimate, template the opening, and give you a written line-item quote before any glass is ordered.
Written by Nate Calloway, Owner at Spruce Contractors, serving South San Francisco and the San Francisco Peninsula.