Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Broadmoor, CA | Spruce Contractors
We’re Spruce Contractors, and we provide independent Mr-Glass shower enclosure installation, replacement, and repair across Broadmoor. What separates our Mr-Glass work here is simple: this tiny incorporated city of roughly 4,000 sits wrapped inside Daly City and against Colma, so a bathroom remodel a few blocks from the boundary can trigger a different permit office than the job next door. That cross-jurisdiction reality shapes how we template glass, schedule inspections, and sequence every enclosure we fit. Call (877) 265-5771 for a free estimate.
Why Broadmoor Residents Choose Us for Mr-Glass Service
We’ve installed and serviced Mr-Glass shower enclosures and glass panels through dozens of Broadmoor remodels. We know how their 3/8″ frameless hinged doors, semi-frameless bypass sliders, and Neo-angle corners behave in these tight, fog-cooled homes. We’re an independent contractor, not a Mr-Glass dealer or authorized agent, and we specify their enclosures because they hold up on the small, close-set lots that define Broadmoor.
Nate Calloway, our owner, grew up in Hillsborough and spent years doing everything from foundation work to full custom builds across San Mateo County. When he talks about out-of-plumb 1950s wall framing or marine-air corrosion on south-facing bathrooms, it’s from being on the ladder, not reading a spec sheet. Good work doesn’t need a lot of explaining, you can see it. We bring that same field-level judgment to every Mr-Glass sales & service call we run in Broadmoor.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Broadmoor
- Sliding bypass rollers jumping the track. Colma-fog moisture and hard water gum up the top tracks and rollers on older Mr-Glass bypass doors. You’ll notice the door drags, then lurches, then one panel hops the rail. We clean, re-lube, and when the rollers are shot, swap in genuine Mr-Glass replacements so the door glides like it did when new.
- Corroded chrome and anodized hardware. On the marine-air side of south and west-facing bathrooms, salt-laden air pushes in from over the hills and pits semi-frameless hinges and handles faster than you’d expect. We see it more in Broadmoor’s 1940s and 1950s stucco bungalows, where bath windows stayed cracked open for ventilation. We replace with OEM hardware where it’s current, and quality aftermarket equivalents matched to the glass thickness when it’s not.
- Failed curb sweeps and shrinking silicone. Low-clearance baths in those post-WWII ranch homes leave little room for error at the curb. When the vinyl sweep pulls away or the silicone shrinks, water wicks onto the subfloor and you won’t know until the tile grout darkens or the floor feels soft. We reset the curb with proper slope and fit new sweeps before that happens again.
- Hinge-side leaks on frameless doors. Out-of-plumb 1950s wall framing is the rule here, not the exception. A stock Mr-Glass frameless hinged panel templated to “standard” dimensions will show hinge-side leaks and, over time, stress cracks at the glass. We re-template to the actual opening, not the blueprint.
- Discontinued tracks with no OEM parts left. Some older Mr-Glass bypass tracks are long out of production. Rather than chase used parts that will fail in a year, we’re straight about when a re-templated replacement enclosure costs less than repeated patch repairs.
Mr-Glass Service in Broadmoor: What Local Conditions Mean for Your Equipment
Broadmoor is its own incorporated city, but it’s barely a few blocks of mostly post-WWII single-family homes wrapped inside Daly City and against Mr-Glass repair in Colma. That means a bathroom remodel off a narrow interior street can trip Broadmoor’s own permit office and inspection calendar, while a job two doors down, across an invisible boundary, falls under Daly City’s. For glass and shower work, the sequence matters: you don’t frame, waterproof, and hang glass until the right jurisdiction has signed off on the rough-in. We’ve done enough jobs here to know which side of the line a parcel sits on before we touch a panel. That micro-jurisdiction map, not just lot size, shapes every Mr-Glass enclosure we install in Broadmoor. On one 1950s stucco ranch a stone’s throw from the Daly City boundary, we replaced an aging Mr-Glass bypass slider whose rollers had corroded and whose curb sweep had failed, letting water reach the subfloor. We re-templated a new frameless hinged Mr-Glass enclosure to the out-of-plumb opening, reset the curb with proper slope, swapped in OEM hinges and seals, and confirmed the permit jurisdiction before the first panel went in.
Mr-Glass Models & Products We Service in Broadmoor
We install, repair, and replace Mr-Glass frameless hinged shower doors in 3/8″ glass, semi-frameless sliding bypass doors, Neo-angle corner enclosures, and custom-cut panels and mirrors. Our parts approach is practical: genuine Mr-Glass rollers, sweeps, hinges, and seals when they’re still in production, so the enclosure keeps its original fit and warranty. On discontinued tracks and hardware, we move to quality aftermarket equivalents matched precisely to the glass thickness. We keep common Broadmoor-sized sweeps, rollers, and hinge sets in the van, which means most repair visits are one trip.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Broadmoor
These are the ranges you’re looking at for Mr-Glass work in Broadmoor. Your number lands where it does based on glass size, hardware finish, whether we’re re-templating to an out-of-plumb opening, and the condition of the curb and waterproofing underneath.
| Service | Typical Broadmoor Range |
|---|---|
| Frameless Glass Shower Enclosure Installation | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
Every estimate starts with a free site visit. We measure, check the framing, confirm the permit jurisdiction, and write a line-item quote you can hold us to. Call (877) 265-5771 to schedule yours.
Serving Broadmoor, CA — Our Local Coverage Area
We’re based in the Broadmoor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Broadmoor
Yes, most shower enclosure replacements that involve moving or re-waterproofing the curb or drain trigger a permit. Which city issues it depends on your parcel. Broadmoor is its own incorporated city, so most Broadmoor addresses go through Broadmoor’s permit office, but some lots near the boundary may fall under a neighboring jurisdiction’s process. We confirm that before work starts. Call (877) 265-5771 and we’ll check your specific address.
Usually it’s a combination of corroded rollers and a gummed-up top track, made worse in Broadmoor by Mr-Glass service in Pacifica-fog moisture and hard water. Once the rollers wear flat, the panel sits lower and catches the rail. We replace the rollers with genuine Mr-Glass parts and clean the track channel, and the door stops jumping. For a long-term fix, call (877) 265-5771.
Yes, and that’s where templating matters more than the brand. Out-of-plumb framing in Broadmoor’s 1940s and 1950s homes means a panel cut to stock dimensions will leak at the hinge side. We re-template to the actual opening, slope the curb correctly, and hang the glass so the seals seat properly.
It will. Salt-laden air pushing in from over the hills hits south and west-facing bathrooms hardest, and chrome and anodized finishes on older South San Francisco Mr-Glass service semi-frameless doors pit faster than you’d see inland. Choosing a finish rated for coastal exposure, or going frameless with minimal exposed hardware, makes a real difference in Broadmoor.
If the rollers and sweeps are the only problem, and the track and hardware are still in production, repair is usually the cheaper call. When the track is discontinued, the glass is stress-cracked, or the curb has been leaking long enough to damage the subfloor, replacement typically costs less over three to five years. Call (877) 265-5771 for an honest read on your enclosure.
Service Areas Near Broadmoor
We run Mr-Glass service throughout Broadmoor’s ZIP code 94015, and into nearby cities where the same fog-belt realities apply. That includes Broadmoor service area coverage, plus Mr-Glass service in Visitacion Valley and Mr-Glass service in Daly City, where cross-boundary permits and marine-air corrosion are just as much part of the job.
Book Your Mr-Glass Service in Broadmoor Today
We’ll measure, check the framing and the permit jurisdiction, and give you a written line-item quote before any glass is ordered. Call (877) 265-5771 to schedule your free estimate.
Written by Nate Calloway, Owner at Spruce Contractors, serving Broadmoor and San Mateo County.