Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Millbrae, CA | Spruce Contractors
We provide independent Mr-Glass shower enclosure and glass system service across Millbrae, from frameless installs to hardware repairs, and also connect clients with a General Contractor in Millbrae when broader project scope requires it. What sets our work apart here is understanding how settled post-WWII framing and bay-side salt air behave against glass and aluminum. If you need a Mr-Glass repair or replacement in the 94030 ZIP, call (877) 265-5771 for a free estimate.
Why Millbrae Residents Choose Us for Mr-Glass Service
We’ve worked on Mr-Glass enclosures in every corner of Millbrae, from the ranch homes off El Camino Real to the newer builds climbing the hillsides. The recurring theme is the same: these are good enclosures installed in houses that have moved, shifted, and settled for 60-plus years. Nate Calloway, our owner, grew up in Hillsborough and learned early that older Peninsula homes rarely have a truly square opening. That’s the baseline we plan for on every Millbrae job.
We stock OEM-compatible seals, hinges, pivots, and sweep profiles that match original Mr-Glass hardware, which means we’re not waiting on a slow parts chain when a shower door stops closing right. And because we work across Millbrae weekly, we know which street-and-era house combinations tend to have galvanized plumbing, knob-and-tube remnants, and framing that fights you. Good work doesn’t need a lot of explaining – you can see it. Read more about our Mr-Glass sales & service approach.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Millbrae
- Urethane sweep seals that dry out and crack. Millbrae’s dry summers pull moisture out of the bottom water dam seals faster than the marine layer can put it back. You see hairline cracks along the sweep, then water seeping onto the bathroom floor during showers. We replace them with matched profiles before the subfloor takes damage.
- Aluminum channel and hinge pitting from salt air. Homes with bath windows facing the bay pull in marine air that accelerates corrosion on aluminum finishes. The pitting shows first around hinge plates and channel ends. We swap in corrosion-resistant hardware that holds up through the wet season.
- Semi-frameless sliders jumping track or binding. Millbrae’s 1950s and 60s ranch homes have settled enough over the decades that shower openings drift out of plumb. The rollers on a Mr-Glass semi-frameless door start catching. We re-square the opening and rehang the door rather than forcing hardware to do work the framing should have done.
- Tempered panel edge chips from retrofit hardware. Older Mr-Glass panels sometimes get drilled for newer handles or hinges. Edge chips form, and under daily use those can propagate into a full pane failure. We inspect for micro-chips during every service call and flag panels that need replacement before they let go.
- Failed curb seals on original tile bases. Many Millbrae bathrooms still have their original 1940s-60s tile work. The curb seal between a Mr-Glass enclosure and that old tile eventually separates, and the leak is slow enough that homeowners don’t notice until the grout darkens. We re-seal and, where needed, rebuild the curb so the enclosure drains cleanly.
Mr-Glass Service in Millbrae: What Local Conditions Mean for Your Equipment
Millbrae sits directly under the SFO flight path, and that single fact reshapes how we approach shower and glass work here. The city’s airport overlay zone requires detailed plans for any residential project that changes a window or exterior opening, including bathroom remodels where a glass enclosure reconfigures where daylight enters. We size and specify Mr-Glass enclosures during the planning phase, before demolition, because a last-minute enclosure change can send a plan back through city review. On a 1950s ranch-style home near the Millbrae BART area, we replaced a failing semi-frameless Mr-Glass slider whose rollers had bound against an out-of-plumb opening, similar to Mr-Glass service in South San Francisco where aging homes face the same issues. Our crew re-squared the framed opening, upgraded to a frameless 3/8 in. enclosure with new pivot hardware, and sealed the curb against the home’s original tile, and the homeowner now has a door that glides and drains cleanly through the wet season. That’s the difference between treating a shower door as a standalone product and treating it as part of a Millbrae house that has to meet aviation-adjacent building rules.
Mr-Glass Models & Products We Service in Millbrae
We install and service the full range of Mr-Glass shower enclosures and glass systems across Millbrae. That includes frameless shower enclosures with 3/8 in. and 1/2 in. tempered panels, semi-frameless sliding shower door systems, custom mirror and glass panel systems for vanities and closet doors, and the heavy glass hardware – hinges, pivots, handles – that ships with Mr-Glass enclosures. When a repair calls for parts, we match the original profile and thickness spec with OEM or equivalent-grade components. We tell homeowners straight when a re-seal and hardware refresh will outlast the enclosure, and when a panel or frame is too far gone to repair. As an independent contractor, our work is judged on the fit, seal, and finish of each enclosure – not on any manufacturer authorization we don’t hold.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Millbrae
Shower glass work in Millbrae runs in predictable bands depending on what’s being done. A full walk-in shower installation with a Mr-Glass frameless enclosure lands between $4,500 and $12,000. Tub-to-shower conversions run $3,500 to $10,000. A straight shower replacement is $3,000 to $8,500. Bathroom vanity installation, often bundled with mirror and glass panel work, runs $800 to $3,000. What drives the number is panel thickness, hardware grade, whether the opening needs re-squaring, and whether older plumbing or wiring gets exposed once demolition starts. Our free estimate walks through each line item before you commit. Call (877) 265-5771 for an exact quote.
| Mr-Glass Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Serving Millbrae, CA — Our Local Coverage Area
We’re based in the Millbrae area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Millbrae
Yes, but the opening usually needs re-squaring first. Most 1940s-60s ranch homes in Millbrae have drifted out of plumb over the years, and frameless glass tolerates far less movement than framed glass. We shim and square the opening, verify the curb is level, and then install the enclosure. Call (877) 265-5771 to schedule a measurement visit.
Yes, particularly on aluminum channel and hinge finishes in bathrooms with bay-facing windows. The marine layer carries enough salt to accelerate pitting over a few years. We use corrosion-resistant replacement hardware and can advise which finishes hold up longest in your specific exposure.
It can, specifically if the remodel changes a window or exterior opening. Millbrae’s building department requires detailed plans for street-visible additions under the airport overlay, and that can extend to bathroom work that alters fenestration. We size and specify Mr-Glass enclosures early so the plan review doesn’t stall your remodel. Call (877) 265-5771 for guidance on your specific project.
Settled framing is the most common culprit. As post-WWII houses in Millbrae shift, the shower opening drifts out of square, and the rollers on a semi-frameless Mr-Glass slider start catching on the track. Instead of forcing the rollers, we re-square the opening and rehang the door. Estimates are free – call (877) 265-5771.
That depends on the panel condition and the frame integrity. If the glass is sound and only the seals or hardware are failing, a re-seal with OEM-compatible parts often buys five-plus more years. If there are edge chips, deep pitting, or the frame is pulling apart, replacement is usually cheaper than chasing repeated repairs. We’ll give you an honest read either way.
Service Areas Near Millbrae
We serve Millbrae and the surrounding Peninsula communities, including Mr-Glass service in San Bruno, just north along El Camino Real, and Mr-Glass service in Montara, across the hills toward the coast. Burlingame, San Mateo, and Hillsborough are also in our regular rotation. See our full Millbrae service area coverage for details.
Book Your Mr-Glass Service in Millbrae Today
Need a Mr-Glass enclosure repaired, replaced, or installed in Millbrae? Call (877) 265-5771 to schedule your free estimate. We’ll measure, quote line by line, and get your shower glass right the first time.
Written by Nate Calloway, Owner at Spruce Contractors, serving Millbrae and the surrounding Peninsula.