Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Lexington Hills, CA | Spruce Contractors
We provide independent CWS service across Lexington Hills, handling cabinet installation, countertops, and full kitchen and bath remodels. What makes our CWS work different here comes down to one thing: Lexington Hills is unincorporated Santa Cruz County, so permits run through the county, and steep private roads off Idylwild and Summit have to be walked before we quote. If you need CWS repair, refacing, or a full cabinet replacement, call (877) 265-5771 for a free estimate.
We’re not a manufacturer affiliate or an authorized CWS dealer. We’re an independent general contractor that’s worked on hundreds of CWS kitchens and baths in the Santa Cruz Mountains, and we know which CWS sales & service lines and door styles hold up under local humidity, grade, and wildfire-zone conditions. Our team led by Nate Calloway has been running jobs in these hills long enough to know that the access plan gets decided before the cabinet order goes in.
Why Lexington Hills Residents Choose Us for CWS Service
Most remodelers can order a cabinet box. Few know what happens to CWS cabinets when they go into a redwood-era cabin on pier-and-post footings with no continuous subfloor. We do, because we’ve fixed the aftermath. Door warping, hinge pull-out, toe-kick delamination – these aren’t abstract failure modes to us. They’re what we see on homes throughout the 95031 ZIP code.
Our founder, Nate Calloway, grew up in Hillsborough watching older homes get torn down and rebuilt near Crystal Springs Road. That’s where the curiosity started. He spent years in the field doing foundation work and full custom builds across San Mateo County before bringing that same practical eye to Lexington Hills. Good work doesn’t need a lot of explaining – you can see it.
We show up with CWS OEM doors, drawer fronts, and hinges when matching an existing kitchen. Where the originals were underspecified, we use aftermarket soft-close glides and leveling legs that outperform them. That’s the difference between a parts-swapper and somebody who actually understands the cabinet.
Styles & brands we work with
Common CWS Construction Problems We Solve in Lexington Hills
- Cabinet box sag and hinge pull-out. Older Lexington Hills cabins were built with redwood studs that are rarely plumb. When CWS cabinets go up on out-of-plumb walls without shims or blocking, the boxes twist and hinges tear out. We re-hang with a continuous leveling rail and plywood backer, then reset the doors square.
- Door warping and finish checking. CWS maple and painted doors don’t love the wide humidity swing between wet winters and dry summers up here. We see checked finishes and bowed doors most often in homes without whole-house ventilation. The fix is usually replacement doors – not painting over a problem that’ll return in two seasons.
- Drawer glide failure and box separation. Heavy stoneware in a CWS drawer with original particle-board substrate is a bad combination, especially after a roof or plumbing leak softens the material. This shows up repeatedly in redwood-era construction. We replace the glides, reinforce the box, and tell you honestly if the cabinet’s worth saving.
- Toe-kick delamination and corner joint separation. Pier-and-post floors move with the seasons. If the original CWS install skipped a leveling rail or continuous subfloor, toe kicks peel and corners open up. We’ve fixed this pattern enough times to spot it from the front door.
- Layout constraints from small mountain kitchens. A lot of Lexington Hills kitchens were sized for a 1960 cabin, not a modern kitchen. We handle CWS reconfiguration and island additions that work within the footprint you actually have, not the one a showroom floor suggests.
CWS Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Lexington Hills is unincorporated Santa Cruz County, which means every CWS kitchen or bath permit goes through the county building department rather than a city counter. For homeowners it adds a step; for us it’s routine. But the piece nobody tells you is this: steep private-road access often requires a pre-application site visit to confirm a delivery truck or crane can reach the job before plans are approved. We’ve stood on driveways off Idylwild Road where the grade simply will not allow a full-size delivery truck to make the final turn. The cabinet order, the countertop fabrication, and the staging plan all have to be sequenced around that reality. That’s not a problem you solve with a bigger truck. You solve it by knowing the road before you promise a date.
Nate’s been running projects in this area long enough to know which hillside lots will fight you on soil conditions and which materials hold up through Bay Area wet winters. When he’s quoting a CWS kitchen in Lexington Hills, the driveway grade gets checked before the cabinet line gets finalized.
CWS Models & Products We Service in Lexington Hills
We work on the full CWS residential lineup: the Concord series, the Lancaster series, and the Hartford series. Concord boxes tend to be the ones we find in original 1980s and 1990s mountain kitchens, while Lancaster and Hartford show up in more recent remodels. We keep CWS OEM hinges, drawer fronts, and touch-up kits stocked for the most common door profiles, which shortens turnaround when you’re matching an existing kitchen rather than starting fresh. For countertops over CWS cabinetry, we specify Cambria, Silestone, and Caesarstone quartz, plus granite slabs sourced from local fabricators who can precision-cut before delivery. That matters when the delivery truck can’t make the final grade and everything has to be carried in pre-fit.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Lexington Hills
What drives CWS project cost in Lexington Hills isn’t just the cabinet line. It’s access, substrate condition, and whether the existing boxes can be saved. Here are the ranges we quote most often:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
A free estimate from us includes a site walk, an access check for delivery, and a written scope. No pricing-by-surprise at the end. Call (877) 265-5771 to schedule yours.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Lexington Hills
It depends entirely on the road’s grade, width, and turn radius. Some private drives off Summit Road and Idylwild Road will take a box truck fine; others won’t take anything bigger than a pickup. That’s why we do a site access check before we order cabinets or schedule countertop fabrication. Sometimes the right move is pre-fabricating quartz off-site and carrying pieces in. Call (877) 265-5771 and we’ll walk the road with you.
For a straight cabinet swap on existing walls, usually not. But if you’re moving plumbing, adding electrical, changing the sink location, or doing structural work as part of a kitchen remodel, yes, a county permit is required. We handle the permitting through Santa Cruz County as part of the project. Replacement with no layout change is the gray zone where we’ll tell you straight what the county expects.
Warping in maple and painted CWS doors usually comes from the humidity swing between wet winters and dry summers in uninsulated mountain homes. If the home lacks ventilation or the cabinets sit against an exterior wall without a thermal break, doors move. The fix is usually humidity control plus new CWS OEM doors, not just refinishing. We’ll tell you if it’s worth replacing doors or if the boxes are too far gone.
Yes. We source CWS OEM doors, drawer fronts, and hinges to match your existing line – Concord, Lancaster, or Hartford – including finish matching for painted and stained doors. Where a discontinued profile is no longer available, we’ll show you the closest current CWS match before anything gets ordered. For an exact quote on island matching, call (877) 265-5771.
Santa Cruz County requires defensible-space clearing around structures in wildfire zones, and that work often needs to happen before or during a remodel, especially if county inspectors will visit for permits. Practically, it means clearing the access path and staging zone for crews too. We coordinate defensible-space clearing as part of the project so the county inspection and the cabinet install don’t fight each other. Call (877) 265-5771 to talk through your specific lot.
Service Areas Near Lexington Hills
From our base in the mountains, we run CWS cabinet and remodeling work down into Lexington Hills service area neighbors and nearby communities. We serve Santa Cruz, Twin Lakes, Pasatiempo, Live Oak, Soquel, and Capitola. For adjacent mountain communities, see CWS service in Amesti and CWS service in Freedom. Same crew, same county permitting knowledge.
Book Your CWS Service in Lexington Hills Today
If your CWS cabinets are showing their age or you’re ready to plan a kitchen or bath remodel in Lexington Hills, start with a site walk. Call (877) 265-5771 for a free estimate. We’ll check the road access, check the existing boxes, and give you numbers you can actually plan around.
Written by Nate Calloway, Owner at Spruce Contractors, serving Lexington Hills and the Santa Cruz Mountains.