Unilock Construction in Lexington Hills, CA

Unilock Construction in Lexington Hills, CA | Spruce Contractors

We provide independent Unilock hardscape construction and repair across Lexington Hills, covering paver driveways, patios, and retaining walls from initial tear-out through final polymeric sand. The thing that makes our Unilock work here different is pretty simple: we sequence every job around the narrow private roads and steep grades that define this community, because a paver pallet left at the wrong pull-off can stall a project for a week. Spruce Contractors handles the full scope, so one crew manages base work, drainage, and the pavers themselves. Call (877) 265-5771 to schedule a free estimate.

Call (877) 265-5771

Why Lexington Hills Residents Choose Us for Unilock Service

Most contractors in the Santa Cruz Mountains can lay pavers on a flat lot. Lexington Hills doesn’t hand you many flat lots. We’ve rebuilt Unilock Brussels Block driveways on grades that would make a concrete truck driver nervous, and we know what those systems look like after ten winters of runoff sheeting off a redwood canopy. Nate Calloway, our owner, came up running projects across San Mateo and Santa Cruz County hillside lots, so when we talk about slope engineering and drainage, it’s from time in the dirt, not a vendor brochure. That’s why homeowners call us. We’re independent, which means if a Unilock product isn’t the right answer for a given hillside condition, we’ll tell you before we order material.

We also know the neighborhood. Lexington Hills isn’t a grid suburb. It’s unincorporated county land with narrow private roads, steep driveways, and fire-defensible space requirements that most flatland contractors never have to think about. We do. Every Unilock job here starts with access planning, because the delivery logistics can change the entire project sequence. That local knowledge matters as much as the paver brand.

Common Unilock Construction Problems We Solve in Lexington Hills

• Polymeric sand joint failure and paver migration on steep driveways. Lexington Hills winter rains don’t just wet the joints, they scour them. Water sheets off the uphill slope and channels down the driveway, washing out joint sand within a season or two if the base and edge restraint weren’t built for that flow. We repair the field and re-sand using polymeric joint sand rated for slope applications.
• Base settlement and rutting on cut-and-fill mountain grades. A lot of Lexington Hills driveways were graded decades ago with whatever fill came off the hillside. Those bases settle unevenly, showing up as rocking pavers and ponding at the apron. We rebuild the base properly, because resetting pavers over a bad base just buys you eighteen months.
• Efflorescence and surface staining under redwood canopy. Shaded lots here stay damp through most of the rainy season. Light-colored Unilock pavers in those conditions develop efflorescence and organic staining faster than sun-exposed patios. We correct the drainage where it helps and handle the surface restoration without damaging the paver face.
• Retaining wall face spalling and batter creep where drainage was never tied to seep lines. Pisa2 wall block does its job when the wall drains. When a hillside has actual groundwater seeps and the wall was built with no drain line or weep holes, hydrostatic pressure pushes the block face forward over time. We rebuild those walls with proper drainage and geogrid tied to the actual seep lines we find on site.
• Paver driveway edge failure on steep grades. Edge restraint is the first thing to fail on a Lexington Hills driveway. The outside course of pavers takes the lateral force from every vehicle turning and every storm. We replace edge courses with proper concrete curbing or heavy-duty edge restraint so the field doesn’t creep toward the downhill side.

Unilock Service in Lexington Hills: What Local Conditions Mean for Your Job

Here’s the thing most paver companies won’t tell you until the truck is stuck: a full pallet of Unilock pavers often can’t be dropped at the curb in Lexington Hills. The roads are private, narrow, and winding. A full-size semi with a piggyback forklift will not make the turn off the main road onto most of these drives. Deliveries get staged at a pull-off, then shuttled up in a smaller truck or a tracked skid steer. That changes the sequence. We plan the base excavation in lifts that match what we can haul up the drive, not what a flatland crew would stage in one morning. It also changes your timeline slightly, but it protects your driveway and your neighbor’s road from getting chewed up. Good work doesn’t need a lot of explaining, you can see it. If a contractor’s bid doesn’t mention staging and access, they haven’t worked here before.

Unilock Models & Products We Service in Lexington Hills

We install and repair the Unilock lines that actually hold up on mountain property. Unilock Brussels Block pavers are the workhorse for steep driveways, with enough texture to keep tires gripping in wet conditions. Unilock Cambridge Pavingstones with ArmorTec give a cleaner face for patios and walkways. Beacon Hill Flagstone handles irregular, natural-look surfaces that sit well against a redwood backdrop. Pisa2 retaining wall block is our default for terracing hillside lots. On the parts side, we source genuine Unilock pavers and wall block when we’re matching an existing field, and we use quality aftermarket base aggregate, geogrid, and polymeric sand where the spec allows. The structural layers matter more than the label on the sand. We stock common base and joint materials locally for faster Lexington Hills turnaround, so we aren’t waiting on a distributor every time a job starts. Unilock sales & service is a core part of what we do, but we’re not tied to one catalog if the site calls for something else.

Unilock Service Pricing in Lexington Hills

FAQs – Unilock Construction in Lexington Hills

Are you an authorized Unilock dealer? No, and that’s intentional. We’re an independent contractor who installs and repairs Unilock systems. That means we can pair Unilock pavers with whatever base, drainage, and edge restraint the site actually requires, without a manufacturer pushing one product line. It also means we’ll tell you honestly when a different paver system fits the job better.

Do you use genuine Unilock parts for repairs? Yes, when we’re matching an existing field. If you have Brussels Block pavers installed and a section needs replacing, we order genuine Unilock product to match color and profile. For the structural layers, base rock, geogrid, and joint sand, we use quality aftermarket materials where the spec allows.

How long does a paver driveway replacement take in Lexington Hills? Typically five to nine working days, depending on grade and access. The staging logistics on narrow private roads can add a day at the front end. We’d rather sequence it right than rush material up a steep drive and damage the road or the existing hardscape.

Which Unilock models do you work with? Brussels Block, Cambridge Pavingstones with ArmorTec, Beacon Hill Flagstone, and Pisa2 retaining wall block are the lines we install and repair most often in the Santa Cruz Mountains. If you have an older Unilock product, we’ll assess availability for matching and give you a straight answer on repair versus replacement.

Do I need to clear defensible space before you install a paver patio? Yes, at least the area within the project footprint plus working access. Lexington Hills is wildfire country, and county requirements for defensible space apply to any construction activity. We’ll walk the site with you and flag what needs clearing before we bring equipment in. Call (877) 265-5771 for a site assessment, it’s free.

Service Areas Near Lexington Hills

We work across the Santa Cruz Mountains and the surrounding communities. If you’re in Santa Cruz, Twin Lakes, Pasatiempo, Live Oak, Soquel, or Capitola, we cover those areas too. See our Lexington Hills service area page for details. We also run Unilock jobs in Unilock service in Amesti and Unilock service in Freedom for neighbors on the southern side of the county.

Book Your Unilock Service in Lexington Hills Today

If your paver driveway is heaving, your patio joints are washing out, or you’re planning new Unilock hardscape on a Lexington Hills hillside, call us. We’ll walk the site, talk through access and drainage, and give you a written estimate with real numbers. Reach Spruce Contractors at (877) 265-5771.

Written by Nate Calloway, Owner at Spruce Contractors, serving Lexington Hills since the company’s first hillside paver projects in the Santa Cruz Mountains.