Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in La Selva Beach, CA | Spruce Contractors
We install and repair Unilock paver patios, driveways, and retaining walls across La Selva Beach, and we’re one of the few crews here that’s rebuilt hardscape on sand-adjacent lots where the base failed. We also offer Unilock repair in Aptos Hills-Larkin Valley for coastal homeowners nearby. The work we do in this town is different because nearly every project sits inside the Coastal Zone, under Santa Cruz County and California Coastal Commission review. That changes how a patio gets built, not just permitted. If your Unilock surface is sinking, whitening, or losing joints, call Spruce Contractors at (877) 265-5771 for a free estimate.
We’re an independent contractor. We are not authorized, sponsored, or warranty-endorsed by Unilock.
Why La Selva Beach Residents Choose Us for Unilock Service
Most paver failures in La Selva Beach don’t start with the paver. They start with what’s underneath. Marine-layer moisture, salt-laden air, and sand that shifts under shallow footings all work against a standard installation. We’ve torn out enough failed Unilock fields along this stretch of coast to know when a repair will hold and when a field needs a full rebuild with an engineered base. Our Aptos Unilock service covers similar coastal conditions just north of here.
Nate Calloway, our owner, learned the trade in San Mateo County and has been running coastal projects long enough to know which soil conditions fight back. He’s the one who decides whether a sinking Brussels Block patio gets re-sanded or dug out to the geotextile. Our crews carry genuine Unilock units, matching edge restraints, and permeable joint sand sized for storm-surge drainage. We live in the same zip codes we work in, including La Selva Beach. Unilock sales & service is what we do, but the local conditions are what we build for.
Styles & brands we work with
Common Unilock Construction Problems We Solve in La Selva Beach
- Efflorescence and salt-film whitening on Brussels Block and Beacon Hill Flagstone: Pacific salt-laden air never fully dries, so mineral deposits pull through the paver face and leave a chalky white film. We clean and seal with products that tolerate marine moisture, not the generic sealers that flake in salt air.
- Polymeric sand joint loss and paver migration: When a patio or driveway was set on standard spread footings over sand-adjacent soil, the joints wash out within a season or two. Pavers drift, edges open up, and trip hazards form. We reset the field or rebuild the base depending on what’s actually underneath.
- Spalling and edge chipping from winter storm-surge flooding: When storm surf saturates the base course, hydrostatic pressure lifts the paver field and freezes the surface layer. We see chipped edges and cracked units on driveways close to the shore. The fix is drainage and base rebuild, not just replacing broken pavers.
- Corroded edge restraints and fasteners on U-Cara wall systems: Direct salt spray eats through standard steel restraints within a few years. Courses drift, caps loosen. We replace with corrosion-resistant restraints and matching Unilock caps so the wall stays true.
- Sunken driveways over failing sand bases: Older beach cottages often sit on piers or slabs with driveway pavers laid over beach sand. The field sinks unevenly, water pools, and the whole approach needs re-grading and an engineered base.
Unilock Service in La Selva Beach: What Local Conditions Mean for Your Equipment
La Selva Beach is unincorporated and sits largely inside the Coastal Zone. That’s not a zoning footnote. It means a paver driveway or patio on a sand-adjacent lot can require a Santa Cruz County permit plus California Coastal Commission review before we even open the ground. The Commission cares about runoff, permeability, and flood-zone elevation. In practice, that rules out simple paver-over-gravel installs on many lots. We’re usually specifying permeable, engineered-base systems with geotextile separation because that’s what passes review and actually survives storm-surge winters. A patio that would sail through in Capitola or Soquel can take weeks longer to permit in La Selva Beach. We plan for that up front, not after the homeowner’s already picked a stone.
If your lot is low-lying, near the sand, or in a FEMA-mapped flood zone, expect the base-flood-elevation discussion to come up. Older beach cottages with shallow foundations are the most likely to trigger it. Our job is to build a Unilock surface that holds up to the review and the weather.
Unilock Models & Products We Service in La Selva Beach
We install and service the full Unilock line in La Selva Beach, with the most local work centering on Brussels Block and Beacon Hill Flagstone for patios and walkways, Bristol Valley for driveways that need a rugged surface, and the U-Cara retaining wall system for grade changes and coastal erosion lines. We also handle Unilock in Rio Del Mar for homeowners in that beach community. When a unit is still in production, we source genuine Unilock units and matching edge restraints and caps. When a line is discontinued, we’ll tell you directly and offer the closest current match. We stock common Brussels Block and U-Cara replacement units locally so a La Selva Beach repair doesn’t wait on a Midwest freight truck.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in La Selva Beach
The cost of Unilock work here depends on what’s underneath the pavers, not just the pavers themselves. A stable field that needs re-sanding and edge restraint replacement is a modest job. A paver system on a failing base over sand is a rebuild. Either way, we give written line-item quotes before any work starts.
| Service | Price Range in La Selva Beach |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the spread: lot access, base depth, drainage requirements, and whether the Coastal Commission is involved. Estimates are free. Call (877) 265-5771 and we’ll walk the site with you.
Serving La Selva Beach, CA — Our Local Coverage Area
We’re a La Selva Beach General Contractor based in this area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in La Selva Beach
Only if the base is engineered for it. A sand-side lot needs a geotextile-separated, compacted base with drainage designed for storm-surge water movement. We won’t lay pavers over beach sand with a cosmetic base layer. That’s the install that fails in two years, and we’ve rebuilt too many of them to repeat the mistake. Call (877) 265-5771 and we’ll tell you exactly what your lot needs.
It very likely does, especially on a sand-adjacent lot. The Coastal Commission reviews hardscape for permeability, runoff, and elevation compliance. We handle the permit scope and the paperwork so you’re not managing two agencies on your own. We pull permits, pass inspections, and build to the approved plan.
That’s efflorescence, and in La Selva Beach it’s salt-driven. Marine moisture pulls soluble salts and minerals through the paver face, leaving a white film that never fully dries in the fog belt. We clean with products formulated for salt-heavy environments and seal with a marine-grade sealer that holds up to repeated moisture exposure. Call (877) 265-5771 for a free estimate on cleaning and sealing.
When the base is sound and the field is stable, yes. We reset individual units, re-sand joints, and replace broken pavers without digging out the whole surface. When the base has failed, a partial patch will sink again and waste your money. We’ll show you what’s underneath before we recommend either path.
They do when the restraints and fasteners are specified for salt exposure. The U-Cara system uses steel components that corrode fast in direct salt spray if a standard grade is used. We swap in corrosion-resistant restraints and match genuine Unilock caps so the wall holds its line. A well-built U-Cara wall handles La Selva Beach conditions well. A poorly restrained one drifts within a few seasons.
Service Areas Near La Selva Beach
In addition to La Selva Beach, we serve Santa Cruz, Twin Lakes, Pasatiempo, Live Oak, Soquel, and Capitola. If you’re in Brookdale or Day Valley, we handle Unilock service there as well. See our La Selva Beach service area page for full coverage details.
Book Your Unilock Service in La Selva Beach Today
If your Unilock patio is whitening, sinking, or losing joints, we’ll inspect the field and tell you what it needs. Estimates are free and line-itemed. Call Spruce Contractors at (877) 265-5771 to schedule yours.
Written by Nate Calloway, Owner at Spruce Contractors, serving La Selva Beach and the Santa Cruz County coast.