Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Lexington Hills, CA | Spruce Contractors
We provide independent Tremron paver and retaining wall service across Lexington Hills and nearby, including Los Gatos Tremron service, and the one thing that makes our work here different is that we already know what fights you: steep grades, private-road access, county review, and runoff that punishes a flat-lot paving detail. We’ve laid, cut, and re-set Tremron Sierra, Olde Towne, and Bedford units up and down these mountain lots long enough to know which details hold and which ones the wet season will find. If you’re pricing a paver driveway, patio, or retaining wall in the 95031 zip, call (877) 265-5771 and we’ll give you a straight, site-specific quote.
We’re Spruce Contractors, a licensed general contractor serving Lexington Hills service area with Tremron hardscape work as one of our core trades. We operate as an independent contractor, not a manufacturer affiliate or authorized Tremron dealer. That distinction matters because we answer to you, not a distributor’s sales target.
Why Lexington Hills Residents Choose Us for Tremron Service
Most hardscape problems in Lexington Hills don’t start with the paver. They start with the base, the drainage plane, and whether the delivery truck can reach the parcel at all. Our crew understands that sequence because we’ve worked it end to end on lots like the one off a private drive in the Lexington Hills area where a Tremron Sierra driveway scoured out at the toe after two wet winters. We lifted the field, rebuilt the base with a proper drainage plane, and re-set with fresh polymeric joint sand and new edge restraint. The delivery truck couldn’t make the last stretch of grade, so we staged pallets at a pullout and shuttled units up with a smaller rig. That’s the difference between a contractor who’s done this before and one who discovers the problem on day one.
Nate Calloway, our owner, grew up near Crystal Springs Road watching older homes get rebuilt, and he’s been running hillside jobs long enough to know which soil conditions fight you and which materials survive the Bay’s wet winters. Good work doesn’t need a lot of explaining, you can see it. When we quote a Tremron job in Lexington Hills, we quote the access and base work as line items, not surprises at the end.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Lexington Hills
Here’s what we see repeatedly on Lexington Hills properties, and what actually causes it:
- Joint-sand loss and edge creep on steep driveways. Runoff velocity on a Lexington Hills drive grade strips polymeric sand out of the joints much faster than a flat lot ever sees. The fix isn’t just re-sanding; it’s checking edge restraint, base compaction, and whether the pavement cross-slope is pushing water where it shouldn’t. We re-set the edge, re-sand with quality polymeric material, and correct the drainage detail where it’s failing.
- Base failure on older cabin lots. Many Lexington Hills parcels are pier-and-post-era cabins with disturbed fill or an old unengineered retaining edge. When the paver field meets that fill line, differential settlement shows up as a sunken panel or a wandering border. We saw this pattern enough to recognize it on a first look.
- Efflorescence and surface staining under redwood canopy. Shaded and damp wall block and pavers stay wet through the wet season, and white mineral staining follows. We clean it properly and, where needed, adjust surface drainage so the area dries faster between storms.
- Sheared or spalled units at the toe of a steep drive. Winter storm flow and debris scour the bottom of the paver surface and kick out edge restraint. We see spalled units there more often than anywhere else on the field. The repair means replacing the damaged units with matching Tremron product and rebuilding the toe restraint stronger than the original install.
Tremron Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Lexington Hills is unincorporated Santa Cruz County, so there is no city permit desk running hardscape and grading review. It goes through the county, which means the review timeline, setback rules, and impervious-surface limits differ from the incorporated cities around us. We handle the paperwork and know which details the county reviewer flags on mountain parcels. On top of that, the narrow private roads and steep driveways here often determine whether a concrete truck or crane can even reach the job. We’ve confirmed paver deliveries and equipment access before scheduling, because a pallet of Tremron wall block sitting at the county road doesn’t help your retaining wall get built. We also handle Tremron service in Monte Sereno with the same access planning. Staging and access planning come before design on this hill.
Tremron Models & Products We Service in Lexington Hills
We work with the Tremron lines most common on Santa Cruz Mountains properties: Sierra 6×9 and 6×6 pavers, Olde Towne and Westminster wall block, Mega Olde Towne and Tavern pavers, plus Bedford and Oxford retaining wall systems. When a repair is needed, we buy genuine Tremron units and matching edge restraint so color, thickness, and modular dimensions stay true to the existing field. We pair them with quality polymeric joint sand, not the bargain bag that washes out after one wet season. If a failure is confined to one settled panel or a scoured toe, we lift and re-set that section on a rebuilt base rather than tearing out an entire driveway. Our Tremron work fits within the broader hardscape and exterior scope we run as a general contractor. For the full picture of our Tremron sales & service experience, that page covers the brand-level approach.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Lexington Hills
Pricing in Lexington Hills reflects access, grade, and base conditions more than paver unit cost. Here’s what you can expect for the most common Tremron scopes:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the spread is base depth, drainage correction, edge restraint, and access difficulty. A flat courtyard patio costs less than a steeper drive with a toe repair and limited staging. Our free estimate walks the site with you, confirms access, and gives you a line-item quote so you know where the money goes. Call (877) 265-5771 for an exact number on your parcel.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, and we offer Tremron repair in Cambrian Park too. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Lexington Hills
Yes, when the base, edge restraint, and joint material are designed for it. Tremron pavers themselves are modular concrete units with enough structural strength for steep-drive use, but the system fails when water gets under the base or the edge lets go. On Lexington Hills grades we build deeper base sections, we re-set edge restraint as a structural detail, and we use quality polymeric sand. If the toe of the drive is already scoured, call (877) 265-5771 and we’ll tell you whether it’s a repair or a rebuild.
We don’t know until we look at the road, the grade, the last turn, and the pullout options. Some Lexington Hills parcels have no turnaround, and a full semi won’t make the climb. We’ve staged pallets at a pullout and shuttled units up with a smaller rig more than once. We confirm access before we schedule, and that’s part of the free estimate.
It depends on scope, slope, and impervious-surface coverage. Lexington Hills is unincorporated Santa Cruz County, so the county reviews it. Driveways with significant grade changes or retaining elements usually trigger review. Patios below the threshold often don’t. We’ll tell you before you commit, and we pull the permits when the job needs them. Call (877) 265-5771 for a site-specific answer.
Usually yes, if the base and edge restraint are addressed at the same time. We lift the affected section, rebuild the base at the toe, re-set the units, and install new edge restraint plus fresh polymeric sand. If the base has failed broadly, replacement may be cheaper than repeated patching. We’ll give you an honest read either way.
That’s efflorescence, a mineral deposit that forms when moisture moves through concrete and evaporates on the surface. Under heavy redwood canopy in Lexington Hills, the shaded and damp winter conditions make it more visible. It can be cleaned, but if the area stays perpetually wet, the staining will return. We look at the drainage and shade pattern so the fix lasts. Call (877) 265-5771 for a quick assessment.
Service Areas Near Lexington Hills
We run Tremron hardscape crews throughout the Santa Cruz Mountains and down into the surrounding valleys. If you’re just over the hill or off a neighboring ridge, we cover Tremron service in Amesti, Tremron service in Freedom, plus Santa Cruz, Live Oak, Soquel, Capitola, Twin Lakes, and Pasatiempo. Call us and we’ll confirm whether your parcel is in our route.
Book Your Tremron Service in Lexington Hills Today
If your paver driveway is scouring out, your joints are washing, or you’re planning a new Tremron patio or wall on a steep Lexington Hills lot, let’s walk the site together. We also do Tremron repair in Scotts Valley. Call (877) 265-5771 to schedule your free estimate. We’ll confirm access, check the grade, and give you a line-item quote on the spot.
Written by Nate Calloway, Owner at Spruce Contractors, serving Lexington Hills and the Santa Cruz Mountains with Tremron hardscape work built for the hill.