Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Felton, CA | Spruce Contractors
Mr-Glass service in Felton comes down to one thing most contractors miss: the redwood canopy. We’re Spruce Contractors, an independent Mr-Glass service provider serving Felton and the surrounding Santa Cruz Mountains. We install and repair Mr-Glass windows, patio doors, and shower enclosures, and we’ve learned that glass units here fail differently than they do anywhere else. Redwood needles, heavy winter rain, settled hillside framing, and narrow access roads off Highway 9 all shape how we approach every job. If you own a Felton home with Mr-Glass products, call (877) 265-5771 for an assessment that accounts for your actual site conditions.
Why Felton Residents Choose Us for Mr-Glass Service
We know Mr-Glass product lines well enough to quote honestly: what’s worth repairing, what’s past saving, and what the replacement will actually cost, whether it’s here in Felton or for Mr-Glass service in Mount Hermon. Nate Calloway, our owner, grew up around old homes in Hillsborough and spent years in the field before Spruce Contractors started running projects across the Bay Area. That background matters here. Felton homes are a mix of redwood-era cabins, mid-century builds, and newer custom houses on steep, wooded parcels. None of them fit a stock installation template, and Mr-Glass units installed twenty years ago were rarely flashed or shimmed for the way these hillside lots settle and drain. We approach every Mr-Glass window or door with that in mind, not as a drop-in part swap.
We’re independent, which we’ll say plainly: we are not manufacturer-authorized or factory-affiliated. What that means for you is we quote and document every job on its own merits. We use Mr-Glass OEM or exact-spec replacement glass, rollers, balances, and weatherstripping so fit and warranty-ability stay intact. No upselling, no mystery materials. You pick the look; we know the materials.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Felton
- Sliding patio doors that drag or jump the track. Redwood needles and fine grit pack into Mr-Glass roller tracks after a wet season. Felton’s canopy drops debris constantly, and once it mixes with rain, it turns into a paste that grinds rollers down. We pull the door, clean the track, and replace Mr-Glass OEM or exact-spec rollers so the door glides without binding.
- Fogged dual-pane IGUs. Failed perimeter seals are common on older Mr-Glass vinyl units that face heavy winter rain and strong sun exposure through the canopy openings. Once the seal goes, argon escapes and condensation forms between the panes. We can replace the IGU when the frame is sound; when the frame is compromised, we say so and quote replacement instead of pretending a reseal will hold.
- Vinyl sash and frame warping or cracking. Mr-Glass vinyl units that sit in full canopy-filtered sun through hot summer afternoons can warp where the frame isn’t properly supported. That warp creates air and water leaks at the corners. The fix often means re-shimming the rough opening and replacing the sash, not just caulking over the crack.
- Leaking heads and sills during atmospheric-river storms. Older Mr-Glass windows on sloped Felton lots frequently leak because they were never properly flashed. When hilltop framing settles, even a quarter inch shifts the drainage plane. We re-flash and shim the rough openings during replacement so storm water tracks out, not in.
- Out-of-square shower enclosures in older cabins. Mr-Glass frameless shower enclosures installed in a 1940s redwood cabin rarely meet the original rough opening square. We field-measure every opening and adjust panel specs so the tempered glass seats cleanly, even where walls have moved over decades.
Mr-Glass Service in Felton: What Local Conditions Mean for Your Equipment
Off Highway 9, many Felton homes sit on narrow winding private roads under heavy redwood canopy. That single fact shapes our Mr-Glass work more than any product spec sheet. Large glass units often can’t be delivered by long truck. The drive can’t take the turn radius, and low branches tear tarps. So we hand-carry or crane them in, and we size replacements to fit the access before ordering. That means we walk the path first, measure the tightest turn, and specify glass dimensions that can physically reach the opening. A standard 72-inch slider is worthless if it can’t make the switchback. On a recent job on a wooded lot off Highway 9 near Felton, we replaced a set of fogged Mr-Glass vinyl sliders and windows where the original install had no proper head flashing and the hilltop framing had settled, letting storm water track in—similar challenges we see providing Mr-Glass service in Lompico. We re-flashed and shimmed the rough openings, hand-carried the new units up the narrow private drive, and set tempered glass with new rollers and weatherstripping so the doors glide and seal again. Good work doesn’t need a lot of explaining, you can see it.
Mr-Glass Models & Products We Service in Felton
We work across the full Mr-Glass residential range: vinyl single-hung and double-hung replacement windows, sliding patio doors, frameless and semi-frameless shower enclosures, tempered glass railings, and custom mirrors. On every job we follow the same parts discipline. We use Mr-Glass OEM or exact-spec replacement glass, rollers, balances, and weatherstripping so fit and warranty-ability stay intact. When a frame or IGU is too far gone, we say so and quote replacement rather than sinking money into a failing unit. For faster Felton turnaround, we keep common Mr-Glass roller assemblies, balance springs, and weatherstripping profiles on hand. Shower glass and custom-size IGUs we order to spec after field measurement.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Felton
Window replacement in Felton typically runs from $4,500 to $15,000 depending on unit count, glass package, and access difficulty. Impact window installation, which more Felton homeowners are asking about as wildfire-hardening becomes a real consideration, runs $8,000 to $25,000 for a typical hillside home. The numbers below are the honest ranges, not a teaser.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
What drives the cost in Felton specifically is access. If we’re hand-carrying units up a private drive because a truck can’t make the turn, that’s labor time. If the rough opening has settled framing that needs re-shimming and re-flashing before new glass goes in, that’s framing work, not just a sash swap. Our free estimate puts all of it on paper: materials, labor, access, disposal. Written line items, fixed pricing, no change orders buried in fine print. Call (877) 265-5771 for an exact quote, estimates are free.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well, including nearby areas like Mr-Glass in Scotts Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Felton
Yes. We hand-carry or crane large Mr-Glass units when the road won’t accommodate a delivery truck. We measure the access path before ordering so the glass dimensions fit the tightest turn on your drive. Call (877) 265-5771 and we’ll walk the route first.
Redwood needles and grit pack into the roller tracks during Felton’s wet season, and the track grinds the rollers down. We pull the door, clean the track, and replace the Mr-Glass OEM or exact-spec rollers so the door moves without dragging. A phone call to (877) 265-5771 gets you a diagnosis, usually within the week.
Every time. We re-flash and shim the rough opening on every Mr-Glass window replacement, especially on hillside lots where framing has settled. Proper flashing is what keeps atmospheric-river storm water out of the head and sill. Call (877) 265-5771 and ask us to check what’s behind your existing trim.
If the frame and sash are sound, we can replace just the IGU. If the vinyl frame has warped or the corner welds are cracked, we’ll tell you replacement is the better spend. In Felton, older Mr-Glass units facing heavy rain and sun often fail in both ways. Call (877) 265-5771 for a straight answer after we look at the unit.
Yes. We field-measure every opening and adjust the panel specs so the tempered glass seats cleanly even where the original framing has moved. We don’t force a stock size into a 70-year-old cabin and call it good. Call (877) 265-5771 for a free shower glass measurement.
Service Areas Near Felton
We run Mr-Glass service up and down the Highway 9 corridor from Felton service area into Santa Cruz, Twin Lakes, Pasatiempo, Live Oak, Soquel, and Capitola. On the coast side, we also cover Mr-Glass service in Seacliff and Mr-Glass service in Rio Del Mar. If you’re in the mountains or the flats, we’ll come look.
Book Your Mr-Glass Service in Felton Today
If your Mr-Glass windows are fogged, your sliders are dragging, or you’re ready to harden your home against wildfire and storm, call us. We’ll put eyes on the actual site, not a guess from a photo. Reach Mr-Glass sales & service at Spruce Contractors by calling (877) 265-5771 for a free estimate.
Written by Nate Calloway, Owner at Spruce Contractors, serving Felton, Mr-Glass service in Ben Lomond, and the Santa Cruz Mountains.