Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Sausalito, CA | Spruce Contractors
We provide CGI sales & service for cabinet, countertop, and vanity installation and repair across Sausalito’s hillside and waterfront homes. The work here is different because most jobs start with a hand-carry down a steep lot and end with hardware that has to survive salt fog off the bay. If you’re pricing CGI work or have a cabinet run that’s failing, call (877) 265-5771 for a free estimate.
Spruce Contractors is an independent contractor. We are not authorized, sponsored, or endorsed by CGI. That independence matters: our loyalty is to the fit and the long-term performance of the install in your specific Sausalito house, not to a brand label on the box. We’ve fitted CGI across both zip codes in our Sausalito service area, 94965 and 94966, and we know where these products hold up and where they need extra detailing.
Why Sausalito Residents Choose Us for CGI Service
We’ve spent years installing, fitting, and correcting CGI cabinetry in Sausalito specifically. Hillside cottages and floating homes punish anything that isn’t scribed, blocked, and sealed properly. Out-of-plumb walls are the rule, not the exception, and the marine layer off Richardson Bay keeps moisture in the air year-round. A cabinet that fits fine in a flat suburban tract house will fight you here.
We source genuine CGI components (door fronts, boxes, hinges, glides, matching trim) when a repair needs to blend with an existing run. Where the hardware is the weak point, we specify stainless or corrosion-resistant aftermarket glides and hinges on bay-facing elevations. Nate Calloway runs our Sausalito projects, and he’s been working hillside lots in the Bay long enough to know which materials hold up through wet winters and which ones won’t. Good work doesn’t need a lot of explaining – you can see it.
Styles & brands we work with
Common CGI Construction Problems We Solve in Sausalito
- Swollen cabinet boxes and lifted finish at the toe-kick. Marine fog off Richardson Bay attacks exposed box seams, finish edges, and toe-kick panels on bay-facing walls. The lower few inches of the cabinet absorb moisture, the finish lifts, and the box starts to swell. We replace the damaged boxes and seal the new run properly.
- RTA joints and cam-lock fittings loosening on hillside cottages. When a cabinet is shimmed hard against an out-of-plumb wall instead of being scribed and blocked, the cam-lock fittings carry stress they were never designed for. Doors start to sag, joints open, and drawers bind. We fix the install, not just the symptom.
- Corroded or gummed-up drawer glides and hinges. Unventilated lower cabinets and vanities near the waterfront trap damp air. Standard steel hardware corrodes or gets sticky within a couple of years. We swap in stainless or coated hardware that’s sized for a humid marine environment.
- Countertop seams and backsplash joints opening on pier-and-beam floors. When the floor frame deflects and the cabinet run isn’t leveled to the structure, the countertop carries movement it shouldn’t. Seams open, caulk lines split, and staining starts. We level the cabinet run to the actual structure before setting the stone.
- Failed cabinet runs from water intrusion on converted houseboats. Floating homes near Waldo Point have unique moisture loading. Cabinet boxes that sit against an exterior hull wall can wick water. If the box is damaged, we tell owners straight: replace the affected boxes. Chasing a finish that keeps lifting wastes money.
CGI Service in Sausalito: What Local Conditions Mean for Your Equipment
Here’s something people don’t learn until they’ve done a Sausalito job or two: on the hillside streets above Bridgeway, there’s no rear access. The street is the access. CGI cabinets and countertop slabs get unloaded at the curb and hand-carried or hoisted down to the build site, and the same narrow, steep driveway may be the only route a concrete truck can use. That single fact reshapes every CGI order we place here.
Slab sizes get dimensioned so the piece can physically make the carry. Cabinet boxes get sequenced so the crew isn’t hauling a full run down a 40-degree slope and stacking it in the rain. Every order has to survive that carry before it ever gets set against your wall. It’s why we plan CGI work in Sausalito differently than we would in a neighborhood with a garage-level drop. If your house is on a slope above Bridgeway, the logistics are part of the bid, not an afterthought.
On a post-and-beam home above Bridgeway in CGI in Chinatown territory, our crew unloaded CGI Shaker cabinets and a quartz slab at the street and hand-carried them down because there was no rear access. Then we found the original cabinet run had swollen at the toe-kick from years of marine fog on the bay-facing wall. We replaced the water-damaged boxes with all-plywood CGI units, scribed and blocked them to the out-of-plumb wall, and set stainless glides so the drawers stay smooth in the damp air. That’s the Sausalito version of a standard cabinet job.
CGI Models & Products We Service in Sausalito
We work with the full CGI product range: the Ready-to-Assemble (RTA) Shaker and raised-panel kitchen cabinet lines, the all-plywood cabinet boxes with soft-close concealed hinges and full-extension drawer glides, the CGI quartz and granite countertop programs, and their vanity and bath cabinet lines. For replacement parts, we use genuine CGI components where the repair needs to match an existing run. Where the hardware is the failure point, we specify stainless or corrosion-resistant aftermarket glides and hinges for bay-facing cabinets. We don’t stock a warehouse full of parts in Sausalito. We order dimensional components to match and time them to the job, because there’s no space on a hillside lot to stage a week’s worth of material.
If you’re weighing a full run against a repair, the honest answer depends on the box condition. A hull-adjacent run that’s been wicking water for years is usually a replacement. A loose hinge or a scratched door front is a parts call. We’ll tell you which one you have.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Sausalito
CGI work in Sausalito costs more than the same job in a flat inland city because of access and moisture detailing. The hand-carry, the hoist, the extra blocking and scribing, the stainless hardware – it all adds labor that a standard install doesn’t carry. Here’s what we see on most Sausalito CGI jobs:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Backsplash Installation | $800 – $2,500 |
What moves the number: access (a street-level garage can subtract real labor; a hand-carry down a slope adds it), box condition, whether the runs are out of plumb and need scribing, and how much of the hardware needs upgrading for salt air. Our free estimate is a written line-item quote, not a verbal ballpark. Call (877) 265-5771 and we’ll walk the job.
Serving Sausalito, CA — Our Local Coverage Area
We’re based in the Sausalito area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Sausalito
The swelling comes from marine fog and salt-laden air working on the exposed box seams, finish edges, and toe-kick panels. We replace the water-damaged boxes with all-plywood CGI units, seal the exposed edges, and set stainless hardware that won’t corrode in the damp air. Call (877) 265-5771 for a look before the damage spreads up the run.
Yes. On hillside streets above Bridgeway we unload at the street and hand-carry or hoist slabs down to the build site. We dimension the slab so it survives the carry, and we plan the sequence so the crew isn’t fighting the slope with a full run on hand. The access work is priced into the estimate, not added as a surprise.
They’ll fit, but only if the installer scribes and blocks the run instead of cranking the shims to force it flat. Forcing RTA joints against an out-of-plumb wall stresses the cam-lock fittings and loosens the run over time. We scribe the boxes to the wall and set the hardware so the doors and drawers operate true.
It can be, with two adjustments. The all-plywood CGI vanity boxes hold up better than particleboard in a humid floating home, but you need stainless or coated hardware and sealed edges on any wall that faces the hull. We install Marin City CGI service vanities in houseboat bathrooms near Waldo Point and Richardson Bay, and the detailing makes the difference.
If the cabinet run isn’t leveled to the actual structure, the seam will open and the stone can crack. We level and block the run to the pier-and-beam frame before the countertop goes down. That’s the step that separates a seam that stays closed from one that splits in the first wet winter. Call (877) 265-5771 for an exact assessment.
Service Areas Near Sausalito
We run CGI service throughout Sausalito and the surrounding Bay communities, including CGI service in Tiburon and CGI service in Belvedere. If your home is on a slope, on the water, or both, the same access and moisture logic applies across the bay.
Book Your CGI Service in Sausalito Today
Call (877) 265-5771 to schedule a free estimate for CGI cabinet, countertop, or vanity work in Sausalito. We’ll walk the site, check access, and give you a written line-item quote. If the job is a repair and we can pull the parts locally, we’ll tell you how fast it can happen.
Written by Nate Calloway, Owner at Spruce Contractors, serving Sausalito and the Bay Area hillsides.