Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Martin, CA | Spruce Contractors
We’re Spruce Contractors, an independent Mr-Glass service provider in San Martin, CA. We specify, install, and repair Mr-Glass shower enclosures, glass panels, and railing systems across the 95046 ZIP. What makes our Mr-Glass work different here comes down to one thing: most San Martin homes run on private wells, and hard well water etches shower glass faster than anything we see on municipal supply. Call (877) 265-5771 for a free estimate.
Why San Martin Residents Choose Us for Mr-Glass Service
We’ve installed and serviced Mr-Glass sales & service products across hundreds of South County projects. Frameless enclosures, hinged and sliding configurations, railings, mirrored panels. We know the product line cold. Being independent means we call problems what they are: a seal failure versus an installation failure, a glass panel worth saving versus one that needs replacement. Nate Calloway, our owner, has been running construction jobs in this region long enough to know which materials hold up through the Bay’s wet winters and which ones fight you on a sloped rural lot. Good work doesn’t need a lot of explaining, you can see it.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Martin
- Hard-water mineral etching on shower glass. San Martin well water carries heavy mineral content. Unprotected Mr-Glass panels cloud up years faster than they would on treated municipal water. We polish out early etching when the glass is sound, and we recommend a surface protectant for new installs.
- Hinge and pivot seal failure from thermal cycling. Inland valley summers here swing past 100°F, then drop at night. That expansion and contraction works at silicone and gaskets until a frameless enclosure starts weeping at the hinge block. We replace the OEM seals and re-set the panel.
- Out-of-plumb frame bindings on rural and estate builds. Large-lot custom homes settle differently than tract housing. A Mr-Glass slider that was dead-square at install starts dragging after a season or two. We pull the frame, re-shim, and re-hang.
- Door-closer and pivot hardware corrosion. Pool houses, shops, and outbuildings in San Martin see humidity from well-fed irrigation and winter rain with no climate control. Hardware corrodes fast. We swap in OEM pivot sets rated for the exposure.
- Glass chipped at the hinge cutout. This one’s usually an install issue from the original job, not age. When a panel is chipped at the hinge cutout, no hardware swap will fix the leak. We’ll tell you straight and quote the replacement panel.
Mr-Glass Service in San Martin: What Local Conditions Mean for Your Equipment
Here’s the part most contractors won’t tell you until it bites. Most San Martin parcels are on private wells and septic systems, which means a bath project that adds a shower or changes fixture counts can trigger county well-setback and percolation review before we can even template the Mr-Glass enclosure. The glass order is often the last thing released, not the first. We saw it on a large-lot parcel off Llagas Road: a client’s master bath had a Mr-Glass frameless enclosure whose bottom sweep had hardened and whose hinge seals were weeping onto new tile, a job that required the same attention to detail we bring to our General Contractor in San Martin projects. We pulled the panels, polished the mineral hazing out of the glass, replaced the OEM hinge and sweep set, and re-set the enclosure with a slight slope correction the original installer had left flat. No more puddle against the tile curb. That’s the San Martin workflow: well water, county review, and glass that has to wait its turn.
Mr-Glass Models & Products We Service in San Martin
We service the full Mr-Glass line: frameless glass shower enclosures in 3/8″ and 1/2″ hinged and sliding configurations, custom mirrored and glass panel systems, glass railing and panel assemblies for decks and stairwells, and the sliding shower door series. For hardware we use OEM Mr-Glass hinges, pivots, seals, and sweeps whenever the glass is still sound. Aftermarket hinge sets rarely match the original hole pattern and torque spec, which means you inherit a new leak. When the glass itself is etched through or chipped, we’ll say so plainly rather than sell a hardware swap that won’t stop the water.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Martin
Cost depends on what’s actually wrong: hardware replacement runs less than a full panel swap. A glass polish and seal service is the most affordable fix when panels are just hazed. Here are the ranges you can expect in San Martin:
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosures | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Tile & Flooring | $800 – $2,500 |
Every estimate is free and line-itemed. You’ll see what the glass costs, what the hardware costs, and what the labor costs, separately. Call (877) 265-5771 and we’ll schedule a site visit.
Serving San Martin, CA — Our Local Coverage Area
We’re based in the San Martin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Martin
Yes, we cover all of San Martin service area. And yes, county review can hold things up on parcels with wells and septic, particularly if your project adds a shower or changes fixture counts. We coordinate the permit sequencing so the glass gets templated at the right time, not before the county signs off. Call (877) 265-5771 for a free estimate.
Most cloudy glass on well water can be polished back to clear if the etching hasn’t penetrated deep. We assess the panel, then quote polish and seal versus replacement. Either way you’ll know the actual cost before we start.
Almost always, yes. We stock OEM Mr-Glass hinge, pivot, seal, and sweep sets, so we can match the original hole pattern and torque spec. If the glass at that hinge cutout is chipped, we’ll tell you before ordering parts. Call (877) 265-5771 to get the exact hardware matched.
For most interior shower and mirrored glass, those rules have minimal impact. For exterior glass railing and panel assemblies, materials and setback requirements can apply, similar to considerations for Mr-Glass in Corralitos installations. We’ll review your parcel’s specifics and spec the railing accordingly.
Templating and panel fabrication typically run one to three weeks after the opening is prepped and measured. If county review is involved on a well/septic parcel, the enclosure is often released after that clears, a process familiar to anyone who has scheduled Mr-Glass service in Amesti. Call (877) 265-5771 and we’ll give you a realistic timeline for your specific property.
Service Areas Near San Martin
We also serve Mr-Glass service in Buena Vista, Mr-Glass service in Gilroy, plus nearby communities including Morgan Hill, San Jose, and Santa Cruz. If you’re anywhere in southern Santa Clara County, odds are we’re already working a job near you.
Book Your Mr-Glass Service in San Martin Today
Call Spruce Contractors at (877) 265-5771 to schedule your free Mr-Glass estimate. We’ll come out, look at your panels or your opening, and give you a written quote with real numbers.
Written by Nate Calloway, Owner at Spruce Contractors, serving San Martin and surrounding South County communities.