Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Redwood City, CA | Spruce Contractors
Spruce Contractors provides independent CGI cabinet installation, refacing, and repair across Redwood City, from the flat bayfill lots of Redwood Shores to the sloped mid-century frames off Woodside CGI service areas along Woodside Road. We’re not a CGI dealer or authorized service center, which means we quote the cabinet line that actually fits your layout and your floors, not whatever’s sitting in a showroom. The difference here comes down to two soil regimes inside one city: engineered fill that keeps settling, and hillside clay that never sat level to begin with. Call (877) 265-5771 and we’ll take a look at both your cabinets and what they’re sitting on.
Why Redwood City Residents Choose Us for CGI Service
CGI boxes are built tight, with factory-finished fronts and consistent tolerances. That’s why we like specifying them for Peninsula kitchens and baths. The problem is that a cabinet is only as good as the surface it’s set on, and Redwood City’s housing stock makes that the real variable. Nate Calloway, our owner, grew up in Hillsborough and trained at College of San Mateo’s construction technology program, and he’s spent enough years in the field across San Mateo County to know which floors will lie to you and which ones will settle under a new cabinet run. We handle full CGI sales & service work the way the box itself demands: shimmed, squared, and scribed to the actual condition of the house.
We’re also honest about when a CGI cabinet should be repaired rather than replaced. We don’t push refacing onto carcasses that have swelled at the base, and we don’t tear out square, dry boxes because a hinge wore out. That kind of straight answer is what keeps our Redwood City customers calling back when the next phase of the remodel starts.
Styles & brands we work with
Common CGI Construction Problems We Solve in Redwood City
- Thermofoil and laminate door fronts delaminating at the edges. Fog-cooled Redwood City summers mean bathroom humidity swings hard between June gloom and dry fall heat. On CGI thermofoil slab fronts, that repeated expansion and contraction peels the foil along the bottom edge and around knobs. We replace those doors or swap to painted solid fronts where the room calls for it.
- Particleboard and MDF box panels swelling at the base. The older 94061 and 94063 blocks around downtown hold plenty of pier-and-beam homes with raised foundations, and under-sink supply leaks in those houses run down into the cabinet bases quietly. By the time you see the base panel swelling, the box is usually compromised. We pull the cabinet, dry and seal the wall, and reset or replace as needed.
- Racked boxes on out-of-plumb walls. Victorian-era and early-1900s wood-frame homes in downtown Redwood City rarely have a square corner left in them. If a prior installer stacked CGI boxes without shimming, doors rub, hinges pull, and drawers bind. We strip the run, re-shim the boxes level and true, and remount fronts to close evenly.
- Soft-close hinge and undermount drawer-glide wear. High-traffic kitchens in Redwood City add cycles fast. We match CGI-spec hinges, glides, and shelf clips from the manufacturer where lead time allows, and use dimensionally matched quality aftermarket hardware when a discontinued finish would otherwise stall the job for weeks.
- Floors that won’t sit still. Redwood Shores 94065 was built on engineered bay fill, and CGI cabinet runs there can rack as the slab continues its long, slow settlement. Hillside 94062 lots have the opposite problem: mid-century floors that were never level to begin with. Both conditions demand a different install sequence, and we prep for both.
CGI Service in Redwood City: What Local Conditions Mean for Your Equipment
Here’s the part no generic cabinet page tells you. CGI boxes specified for the Redwood Shores side of 94065 have to be set and shimmed against engineered fill that keeps settling for years after the slab was poured. The same cabinet plan on a 94062 hillside lot off the CGI in West Menlo Park and Woodside Road corridor has to be scribed to out-of-level mid-century floors that were never flat to begin with. Same door style, same box, two completely different install sequences inside one city. Add in the fact that much of downtown Redwood City sits on land layered between San Francisco Bay mud and the foothill clay along the mountains, and you start to see why a level on a cabinet box tells you more about the house than the cabinet. On a 94062 rancher off Woodside Road, we pulled a CGI thermofoil-front bath vanity whose doors had peeled along the bottom edge and whose base panel had swelled from a slow supply-line leak. We dried and sealed the wall, reset the cabinet against the out-of-level floor with a scribed filler, and set a new CGI plywood-box vanity with solid-door fronts and a quartz top, so the bath came back together without a full tear-out. That’s not a showroom story. That’s the kind of repair Redwood City housing actually produces.
CGI Models & Products We Service in Redwood City
We work across the CGI lines that show up in Peninsula homes most often: Euro-style frameless full-overlay cabinetry, shaker-profile painted and stained door fronts, thermofoil and laminate slab fronts for baths and laundry rooms, and the plywood-box drawer and roll-out systems. We match hinges, glides, shelf clips, and replacement door and drawer fronts from the manufacturer when the finish and profile are still current. When a discontinued thermofoil or a retired stain would otherwise leave a kitchen half-finished for a month, we use dimensionally matched quality aftermarket hardware instead and tell you the difference before we order anything. Our local suppliers keep the common CGI-spec parts on hand, which means most Redwood City callbacks don’t wait on a freight truck.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Redwood City
Cabinet work prices in Redwood City follow the scope, not the square footage. A full kitchen replacement runs the widest range because of what’s hiding behind the old boxes, and a vanity swap in a 94061 bathroom usually lands on the lighter end. Here are the numbers we quote from.
| CGI Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
The biggest cost drivers are wall and floor prep, whether the boxes are being refaced or replaced, and what the existing plumbing reveals once the old cabinets come out. Our free estimate includes a look at the floor level, the wall plumb, and the condition of the cabinet boxes you already have. Call (877) 265-5771 and we’ll put numbers on it.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Redwood City General Contractor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Redwood City
Replacing or refacing cabinets alone typically does not require a building permit in Redwood City, as long as you’re not moving plumbing, electrical, or structural walls. If the cabinet work is part of a larger kitchen or bath remodel that relocates a sink or range, the city will want that portion permitted. We pull permits and arrange inspections when the scope calls for them. Call (877) 265-5771 and we’ll tell you up front whether your project crosses that line.
No. Spruce Contractors is an independent general contractor. We’re not authorized, sponsored, or endorsed by CGI, and we don’t pretend otherwise. That independence is the point: we specify CGI cabinets when they’re the right fit for the project, and we quote alternatives when they aren’t. You get the box that fits your house, not a dealer’s inventory plan.
We use CGI-spec hinges, glides, shelf clips, and door and drawer fronts from the manufacturer whenever the finish and profile are still available and lead time works for your schedule. If a finish has been discontinued or the lead time would stall a kitchen for weeks, we use dimensionally matched quality aftermarket hardware and tell you before we place the order. You’ll always know which parts are going in.
We repair single cabinets, reface individual door runs, and take on full kitchen replacements. Redwood City homes produce plenty of isolated failures: a thermofoil vanity door that peeled in a fog-cooled bath, a base panel that swelled from a slow under-sink leak, a drawer glide that wore out on the pot-and-pan stack. Those are one-day or two-day fixes when the boxes are still square and dry. Call (877) 265-5771 and describe what you’re seeing.
Bathroom vanity installation in Redwood City typically runs $800 to $3,000 depending on whether the wall and floor need shimming, scribing, or plumbing adjustments. A straightforward swap on a level slab sits at the low end. A 94062 hillside bath with an out-of-level floor and old supply lines will land higher. Call (877) 265-5771 for an exact quote, estimates are free.
Service Areas Near Redwood City
We serve Redwood City and the surrounding Peninsula communities, including Redwood City service area coverage from downtown out to the 94065 bayfill and 94062 hillside lots. Our crews also run CGI service in San Carlos and CGI service in Belmont, where older wood-frame housing creates the same floor and wall conditions we see here. Nearby work in Woodside, Emerald Hills, and Redwood Shores comes up regularly.
Book Your CGI Service in Redwood City Today
If your CGI cabinets are showing wear, racking out of square, or peeling at the edges, we’ll come look at the boxes and the floor they sit on. Call (877) 265-5771 to schedule a free estimate. Good work doesn’t need a lot of explaining – you can see it.
Written by Nate Calloway, Owner at Spruce Contractors, serving Redwood City and the greater Peninsula.