Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Las Lomas, CA | Spruce Contractors
We’re Spruce Contractors, and we provide independent CGI cabinet installation, repair, and refacing across Las Lomas. We service CGI Ready-to-Assemble and pre-assembled cabinet lines with stock and order-to-spec parts, but the thing that separates us in Las Lomas is this: we’re not just a parts vendor. We’re a licensed general contractor who handles the County permitting, floodplain review, and agricultural-buffer requirements that go with working on unincorporated Monterey County property.
Nate Calloway has been overseeing cabinet and vanity work here long enough to know that a kitchen remodel off Las Lomas Road doesn’t get the same treatment a Watsonville job does. That local knowledge is why homeowners call us at (877) 265-5771 rather than guessing with a big-box installer who’s never dealt with a County floodplain condition. If you need CGI service that respects both the product and the rules governing this place, we’re your call.
Why Las Lomas Residents Choose Us for CGI Service
CGI cabinets are everywhere in this valley. They’re a solid value line, and we’ve pulled enough of them apart to know what works and what doesn’t. When a homeowner in Las Lomas reaches out about swollen MDF door fronts or soft particleboard bases, we don’t have to research the line. We know what those cabinets do after a few damp Pajaro CGI service winters.
We’re CGI sales & service people in the practical sense, but we are not a manufacturer store. We’re an independent contractor, not CGI-authorized or affiliated, which means we can say the plain truth. When a solid plywood core makes more sense than an MDF replacement, we say so. When a box is still good and all it needs is a new set of doors and soft-close slides, we don’t push a full swap. That honesty saves homeowners money and saves good cabinets from the landfill.
Nate ran through the construction technology program at College of San Mateo and spent years in the field before starting Spruce. He’s the kind of contractor who’ll tell you what he’d put in his own house, then hand you a written line-item quote so you can see exactly where the money goes. That’s the way we work here.
Styles & brands we work with
Common CGI Construction Problems We Solve in Las Lomas
- Swollen MDF doors and sticking drawers from fog-season moisture. Las Lomas gets coastal fog that sits for days, and older homes here often lack the vapor barriers newer builds have. CGI MDF door fronts on cabs set against unheated exterior walls absorb that damp and swell. We replace the doors, remount the hinges, and often swap in sealed-edge replacements that hold up better in this climate.
- Soft particleboard bottoms and failing toe kicks from slow leaks. A slow plumbing leak or a roof drip that’s been wicking into a cabinet base is one of the most common problems we see in Las Lomas ranch-era homes. The particleboard goes soft and spongy, the cabinet loses its shape, and eventually the frame sags. We pull the damaged boxes, dry and repair the framing behind them, and replace with plywood-core CGI units or an appropriate upgrade.
- Loose hinges and drawer slides from decades of heavy use. Farmhouse kitchens get used hard. Jars go in, pots come out, and after a few years, the OEM soft-close slides start to slop and the hinges strip out of the soft box material. We replace the hardware with quality aftermarket soft-close slides and longer screws with proper pilot holes, which often restores the drawer to better-than-new feel.
- Delaminated thermofoil and peeling veneer near dishwashers and sinks. Constant steam and splash from a dishwasher or sink eventually lifts the thermofoil edge on a CGI door or splits the veneer seam. It looks bad, and it lets moisture into the core. We replace the doors and add edge treatment where it matters, so the new set doesn’t fail the same way in three years.
- Out-of-square boxes and sagging shelves from damp-air cycling. In unincorporated Las Lomas, HVAC isn’t always run consistently, and damp-air cycling is rough on cabinet materials. Particleboard shelves bow, boxes rack out of square. We replace the shelves with plywood, re-anchor the boxes, and straighten the lines so doors hang true again.
CGI Service in Las Lomas: What Local Conditions Mean for Your Equipment
Here is what most people don’t realize until they’re in the middle of it: Las Lomas is unincorporated Monterey County. That means a kitchen cabinet or bath vanity project here does not run on CGI repair in Watsonville rules. It runs on Monterey County permitting, and because this area sits next to some of the most productive strawberry and row-crop land in the state, County review includes agricultural buffer, dust, and runoff checks. And if you’re in the Pajaro River floodplain, you’ll also be dealing with elevation and drainage requirements that a city permit office would never flag.
What that means for CGI work is simple. We sequence cabinet and vanity installation around the inspection schedule, not the other way around. If County needs to see the rough framing or the waterproofing before we close walls, we schedule the cabinet tear-out so the inspector gets a clean look. If floodplain elevation affects how a vanity base sits against a wall, we plan for it before the first box comes off the truck. A box-store installer won’t know any of that. We do.
CGI Models & Products We Service in Las Lomas
We work on CGI Ready-to-Assemble shaker and flat-panel kitchen cabinets, the pre-assembled plywood-box lines, solid-wood and MDF door and drawer fronts, and CGI vanity and bath units. When a box is still square and dry, we use CGI-compatible OEM replacement doors and drawer fronts so the match is clean. When OEM hardware has been discontinued or the original slides were weak, we move to quality aftermarket soft-close slides and hinges, then set the doors so they hang and close the way they should have from the factory.
We keep common hardware, hinge plates, and shims in the truck when we work in Las Lomas, so a service call usually doesn’t turn into a two-week wait for parts. For full cabinet runs or custom sizes, we order from our supplier network and plan the install date around the shipping window.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Las Lomas
Pricing depends on how much of the cabinet has to be replaced and whether a remodel involves framing, plumbing, or electrical work. A simple vanity swap with a plumbing reset is much less than a full kitchen reface with new doors, drawer fronts, and soft-close hardware. Here are the ranges we quote for Las Lomas work:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Every estimate we give is a written line-item quote. You’ll see what goes to boxes, what goes to labor, and what goes to permits. No change orders that show up after the job starts. Call (877) 265-5771 to schedule a free estimate and we’ll give you a number you can plan around.
Serving Las Lomas, CA — Our Local Coverage Area
We’re based in the Las Lomas area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Las Lomas
A straight cabinet box swap on existing walls usually doesn’t need a permit by itself, but any time we’re moving plumbing, changing electrical outlets, or altering wall framing, the job triggers a County building permit. And because Las Lomas is unincorporated, Monterey County planning review applies, including ag-buffer and, in some parts, floodplain checks. We sort that out before work starts. Call (877) 265-5771 and we’ll tell you what your specific project needs.
The coastal fog and damp winters here push moisture into MDF door fronts, especially on cabinets set against unheated exterior walls in older single-family homes. When MDF absorbs that moisture, it swells at the edges and the doors start to stick. It’s the most common Las Lomas CGI failure we see. The fix is replacing the doors with sealed-edge panels or upgrading to a solid-wood or plywood-core line that handles moisture better.
Yes. If the boxes are dry, square, and structurally sound, we can replace the doors and drawer fronts with CGI-compatible OEM parts, add new soft-close hardware, and leave you a like-new kitchen for a lot less than a full gut. If the boxes are water-damaged or the particleboard has gone soft, refacing won’t fix it. We’ll tell you which situation you have. An estimate is free, so call (877) 265-5771 and we’ll come take a look.
Usually. Many ranch-era and farmhouse homes here have narrow baths and tub surrounds that have been soaking up moisture for decades. When we pull an old tub out and build a properly waterproofed walk-in shower with a Schluter base and a low threshold, the room dries out faster and works better for aging-in-place. It also opens up the floor plan. We can walk your specific bathroom and give you a price range on the spot.
If your parcel is in the mapped floodplain, Monterey County may require elevation documentation before they approve certain remodel scopes. That can mean delaying cabinet or vanity install until the inspection shows the structure is compliant, or it might mean adjusting how we waterproof and drain around the new work. We already know how to plan a Las Lomas remodel around those requirements, so the job doesn’t stall mid-stream. Call (877) 265-5771 with your address and we can usually tell you quickly if floodplain rules will come into play.
Service Areas Near Las Lomas
Beyond our Las Lomas work, Spruce Contractors covers the broader Santa Cruz and Pajaro Valley area. We regularly take on kitchen, bath, and cabinet projects in Santa Cruz, Live Oak, Soquel, Capitola, and Twin Lakes. You can also check our sister pages for CGI service in Monte Sereno and CGI service in Elkhorn, or review our broader Las Lomas service area coverage.
Book Your CGI Service in Las Lomas Today
If your CGI cabinets are swelling, sagging, or falling apart, we can tell you in one visit whether repair, reface, or replacement is the right move. We work across Las Lomas, from the ranch-era homes off Las Lomas Road to the smaller parcels near the Watsonville line, and we know the County rules that apply to each one. Call (877) 265-5771 to schedule your free estimate. Good work doesn’t need a lot of explaining – you can see it.
Written by Nate Calloway, Owner at Spruce Contractors, serving Las Lomas and nearby Amesti CGI service areas since he first learned which Pajaro Valley soil would fight a foundation and which cabinets would fight the fog.